-QA Testing-
- Queries
- All Stories
- Search
- Advanced Search
- Transactions
- Transaction Logs
All Stories
Jul 8 2018
-QA Testing-
-QA Testing-
Jul 7 2018
I've encountered reverted chunks in some of the blueprints I did, that seemed to have fixed itself after using Clear client cache in the main menu - tools.
It's still an issue but I can reproduce it somewhat which is good.
Correction shifting the clock to a separate docked or not docked entity still resulted in the error messages even though the logic is working fine. Wireless clock signal on the station goes to the door and the door sensor signal gets back to the station door control logic, so no logic that I can see is being blocked.
I could figure out, that this can be solved by activating the advanced energy beam shader
I just ran into this error I think.
Perhaps at the start it was mainly cannons and beams going through the shield due to the bug of T2849. That still appears to be working fine, but the remaining hull damage I saw happen was caused by missiles fired from a different sector than the shield group/entity was in.
You had a few more HUD context options enabled than I did. But it's fixed either way as Schema went through them all to check for any possible mistakes (and fixed some that may have caused it).
Your settings are fine though, didn't see anything odd in it besides the extra HUD Contexts you had enabled.
It works for me as well in .105!!! :D
Ah, I just changed the category and lowered the priority, you did fine. UI Bugs belong here as well, this one should be fixed in the latest dev build, 0.201.105 or above.
Scratch that, I can reproduce now ^^
I should have tried your settings.cfg sooner, but using yours seems to cause it indeed.
Yes - it was just an UI error, sorry. Is this where UI bugs are reported or should they go elsewhere?
Thanks for sharing that world but it seems the files are incomplete. It only contains the npcFactions, where as your world should also contain a DATA and index folder.
Jul 6 2018
Hi Schema!!!!
Could you upload the blueprint of the ship you used? I can't reproduce it with my own ships, visited a random pirate station and fought a few NPC ships as well.
Maybe I got lucky or it's something specific to the ship.
Jul 5 2018
Tested it agan on .104
Had the same issue. Cannons and/or beams just ignore the shields.
I jumped to a pirate station and just let it fire on me (42M shields at 100%).
The just damage the hull.
Maybe this is related to the fact, that pirates or other NPC ships are based on the old power system.
Those issues should be fixed, shield should report its percentage more accurate now and any shield bypass should also not happen anymore.
Could you give it another check? It seems to work fine for my setup where I could reproduce it before.
Alright, I'm assuming you accidentally rotated it with that debug command. That or the issue got fixed along the way, thanks for checking it again!
Unfortunately I'm unable to reproduce the issue following those steps to the letter.
Anything you did after the "Create a station" step that you forgot to mention? Even trivial stuff like connecting a factory to something could be a cause.
tried tons of things with the steps provided but could not reproduce unfortunately.
Rod lights use normal block lights as source block. Using the give command allows you to get those blocks straight up but they're not meant to be used like that anymore.
Jul 4 2018
I can no longer reproduce this in v0.201.100
Fixed by now, it's meant to do this but the power consumption was incorrect.
Should not happen anymore.
Fixed by now.
Fixed by now.
All of those issues were fixed now.
Fixed by now.
Fixed by now.
Fixed by now.
Fixed by now.
Fixed by now.
Fixed by now.
There was a fix for the previous logic loop detection not working properly. Not 100% sure if it is also meant to interfere with the logic, I believe it was simply just a notification message for you to act on and investigate. I'll leave this task on open till I know for sure. Perhaps others can upload a blueprint + a screenshot of what part of their logic does not seem to work anymore that did before.
The message starts with Gate Destination too far!, the maximum distance shown is always the default config value and does not account for chambers,
It's only a GUI issue as jumping through a gate still works fine with a boosted warp distance.
-QA Testing-
Was fixed a while ago.
Duplicate, merging tasks.
This issue might not happen anymore. Can't reproduce it with those steps and haven't run into it myself for a long time either.
If anyone else still gets it, any specific steps you did to reproduce it?
Duplicate, merging tasks.
It may be fixed by now in the pre-release version. It's hard to tell what the original cause was though so another issue could still be there.
Leaving this task on open for more info/clues if it happens again.
What happens is ok, as you should normally not have these effect blocks in your inventory (especially is you use creative/shipyard).
I'm getting an error when I don't have them in my inventory: Paste not complete: not enough blocks!
Jul 3 2018
Re-purposing this task with a related issue.